Radio frequency controllers are a flawless, innovative way to transform your RGB LED strips to a mood-setting device which enhances style and color to any room in your home or business. As with our other products, we have added the ease and comfort of a remote control which permits incredible accuracy of approximately 30 meters. Differently to the infrared system, there is no need to aim at the receiver.
SKY RGB/RGBW Radio Frequency Receiver with Sync Function, 15A/RGB 20A/RGBW
$28.99
- Radio Frequency Communication System.
- Works with any 12 or 24 VDC power supply.
- Pair it up with any LED RGB strips & low voltage units, and RGBW strips & low voltage units.
- 3 Channels (RED, GREEN & BLUE).
- Maximum current: 20A (5 per Channel).
- RGB Rated Power: 180W/12V , 360W/24V.
- RGBW Rated Power: 240W/12V , 480W/24V.
- Hand held remote not included included.
- Works on the 433.92 Mhz RF band.
- Receiving device can be sync to a maximum of 10 hand held remotes.
- Hand held remote can be synced to unlimited receiving devices of the same model.
Only 1 left in stock
Specifications
Electrical Information
Dimmable
By Remote Controller
Input Voltage
12/24VDC
Recommended Power Limit
RGB: 180W/12V, 360W/24V || RGBW: 240W/12V, 480W/24V.
Output Voltage
12/24VDC, Same as Input voltage
Current Per Channel
5A
General Characteristics
Length
8"
Width
5"
Height
2"
IP Rating
IP20
Warranty
2 Years
Finish
White
Brand
SKYDANCE
Installation Related Information
Connection
Screw Terminal Block Connector
Mounting Type
Screw-Ready Brackets on Edges
Control Unit Information
Remote Controller
No Included, Sold Separately
Channels
3 Channels (RGB), 4 Channels (RGBW)
Controllable By
Remote Control (not Included)
Control Distance
30 Meters, 100 feet
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
UL SMD5050 LED Strips 150 RGB Chips, RGB Moderate Light
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 150 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- For interior use only.
- Cut at every 3rd LED / 4" on the cuttable mark.
- Power supply and RGB controller are not included.
3.3-feet 2-pin Female to Male Connector, IP65, White
- Plug and Play Connectors.
- IP65 rated.
- For Single Color.
4-1/2″ LED Flat Round Panel – Multicolor RGBW, 9W
- RGBW Drop Ceiling Lamp.
- It requires a 24VDC power supply and RGBW controller which are not included.
- A power supply can feed several RGBW panel units.
200W Enclosed Power Supply, 24VDC
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 24VDC Output Voltage.
- Maximum power rated at 200W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
RGBW DMX Decoder, 5A per Channel, RJ45
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 4 Channels (RED, GREEN, BLUE & WHITE)
- Maximum current: 20A (5A per Channel)
- Rated Power: 240W/12V, 480W/24V.
- RJ45.
UL SMD2835 LED Strip 600 Single Color Chips, Narrow (5mm/0.20″)
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 600 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- LED flexible strip for interior use.
- Cut at every 3rd LED / 1" on the cuttable mark.
- Power supply is not included.
100W Waterproof Meanwell Power Supply, 24VDC
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 100W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGB Chips, Wet Rated
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGB controller are not included.
