Each DMX common controller occupied 3 DMX address, adopt coding switch is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest , 512 address code could be settled in all. This DMX common controller adopts the advanced micro control unit, receives standard DMX-512 digital control signal and transformed it into PWM signal to driving LED.
RGB DMX Decoder, 6A per Channel, Block Terminal
$49.50
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 3 Channels (RED, GREEN & BLUE)
- Maximum current: 18A (6A per Channel)
- Rated Power: 216W/12V, 432W/24V.
- Block Terminal Connection.
In stock
SKU: ECTL-DM3C6A-BTCategories: CONTROLLERS, DMX, ENTERTAINMENT
Specifications
Electrical Information
Dimmable
By DMX Control
Input Voltage
12/24VDC
Recommended Power Limit
216W/12VDC, 432W/24VDC
Output Voltage
12/24VDC, Same as Input voltage
Current Per Channel
6A
General Characteristics
Length
8"
Width
5"
Height
2"
IP Rating
IP20
Warranty
2 Years
Finish
Black
Installation Related Information
Connection
Screw Terminal Block Connector
Mounting Type
Screw-Ready Brackets on Edges
Control Unit Information
Channels
3 Channels (RGB)
Controllable By
DMX512 Controller
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
$39.50
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.
60W Waterproof Meanwell Power Supply, 24VDC
$35.50
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGB Chips, Wet Rated
$51.50
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGB controller are not included.
60W Dimmable Power Supply for 12VDC LED Units
$105.50
- It operates on 120VAC.
- Dimmable Unit. 12VDC Output Voltage.
- UL Listed, Class 2.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Compatible with most known brand including Lutron, Leviton and Legrand.
- Pair it with Magnetic Low Voltage (MLV) dimmers.
- Manufactured by Magnitude Lighting.
8-feet Flanged Aluminum Channel Silver
$29.25
- Interior use.
- For Recessed mounted applications.
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- Easy installation.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.
150W Enclosed Power Supply, 12VDC
$43.75
- It operates on 115VAC or 230VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 150 RGB Chips, RGB Moderate Light
$22.75
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 150 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- For interior use only.
- Cut at every 3rd LED / 4" on the cuttable mark.
- Power supply and RGB controller are not included.
8-feet Deep Trim-less Aluminum Channel for Drywalls
$69.99
- Interior use.
- For Trim-less mounted applications for a seamless look (Drywall use).
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- 2 LED lines can be installed of 8mm, 10mm, and 12mm strip.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.