Our constant voltage 24-Channel DMX Decoder 3A per Channel is designed for professional use where multiple DMX outputs for LED Strips are required. It has multiple connection interface that includes RJ45, 3-pin XLR and terminal block connections for DMX in and out. The terminal block connection also serves as a DMX signal amplifier to ensure data transmission (Cat 5) over long distances. DIP switches are used for setting the starting DMX address.
RGB DMX Decoder, 72A, 8 RGB Groups
$217.50
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 24 Channels (RED, GREEN & BLUE). 8 RGB Groups.
- Maximum current: 72A (3A per Channel)
- Rated Power: 864W/12V, 1,728W/24V.
- Multiple interfaces for easy use (RJ45, Green Terminal and XLR3).
Only 1 left in stock
Specifications
Electrical Information
Dimmable
By DMX Control
Input Voltage
12/24VDC
Recommended Power Limit
864W/12V, 1,728W/24V.
Output Voltage
12/24VDC, Same as Input voltage
Current Per Channel
3A
General Characteristics
Length
8"
Width
5"
Height
2"
IP Rating
IP20
Warranty
2 Years
Finish
Black
Installation Related Information
Connection
Screw Terminal Block Connector
Mounting Type
Screw-Ready Brackets on Edges
Control Unit Information
Channels
Up to 24 Channels (8 RGB groups)
Controllable By
DMX512 Controller
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
UL SMD2835 LED Strip 300 Side Bendable Single Color Chips, Bright Output
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- For interior use only.
- Works with 12VDC power units.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply is not included.
8-feet Deep Trim-less Aluminum Channel for Drywalls
- Interior use.
- For Trim-less mounted applications for a seamless look (Drywall use).
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- 2 LED lines can be installed of 8mm, 10mm, and 12mm strip.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.
200W Enclosed Power Supply, 12VDC
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 12VDC Output Voltage.
- Maximum power rated at 200W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 150 RGB Chips, RGB Moderate Light
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 150 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- For interior use only.
- Cut at every 3rd LED / 4" on the cuttable mark.
- Power supply and RGB controller are not included.
350W Enclosed Power Supply, 12VDC
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 12VDC Output Voltage.
- Maximum power rated at 350W.
- Recommended to be installed inside a j-box.
- Manufactured by Meanwell.
- Output voltage can be adjusted through potentiometer.
- It comes with an integrated Fan for better heat dissipation.
8-feet Flanged Aluminum Channel Silver
- Interior use.
- For Recessed mounted applications.
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- Easy installation.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.
60W Dimmable Power Supply for 12VDC LED Units
- It operates on 120VAC.
- Dimmable Unit. 12VDC Output Voltage.
- UL Listed, Class 2.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Compatible with most known brand including Lutron, Leviton and Legrand.
- Pair it with Magnetic Low Voltage (MLV) dimmers.
- Manufactured by Magnitude Lighting.
