UL SMD5050 LED Strips 150 RGB Chips, RGB Moderate Light

$22.75

  • Single Color LED Strip.
  • Every unit comes in a roll of 16.4 feet / 5 meters.
  • 150 LED Chips equidistantly located in the complete roll. UL listed.
  • Comes with 3m adhesive tape on the back of the strip.
  • Works with 12VDC power units.
  • For interior use only.
  • Cut at every 3rd LED / 4″ on the cuttable mark.
  • Power supply and RGB controller are not included.

Related linear lighting components frequently needed:
Power Supplies
Aluminum Channels
Multi-Color Controllers
Accessories

Out of stock

Description
The RGB LED strips are a flexible multicolor lighting solution for your lighting challenges for incredible indirect illumination. These strips are designed for interior use, to bend and twist in just about any direction imaginable. Our LED strips use surface mounted LEDs, which allows for incredible flexibility without causing any damage to the product. In addition, all strips come with 3m adhesive tape allowing them to stick to most surfaces. This product comes in Multicolor Light, letting you create any color you desire. The strip can be cut at every 3rd LED, and this feature allow you to obtain the right length of light for your application, and also to illuminate a challenging area where the lighting needed is not continuous. After cutting the strip, the remaining segments of strips are available by purchasing the connectors; check the LED strips accessories section. LED strips work with low voltage, 12VDC, making them suitable and safe for the above-mentioned interior lighting. The power supply is not included, please calculate the total load of the system before purchasing it or please consult a specialist. This product also requires an RGB Controller and is not included.
5-year-warranty

Exceptional Warranty

We stand by our vision of providing excellent products and services so that you can create all of your projects without worrying about the future. That’s why these LED Strips are covered by our exceptional 5 Year Warranty protection.

certified

Certifications

Unlike other competitors LED Strips, these Strips come certified as UL Listed and Class 2. By using these strips and following local regulations, you are guaranteed that your projects will be up to code.

Double Layer PCB

LED tapes made with Double layer PCB tend to have higher lumens and better heat dissipation to significantly improve its stability and life cycle. This helps the circuit board to withstand higher temperatures and electric currents. 

RGB

High CRI of 90RA

The most readily apparent benefit of lights with higher CRI ratings is the improvement in safety as a result of increased visibility.

The higher the CRI, the better the artificial light source is at rendering colors accurately. The lower the CRI value, the more unnatural colors appear when illuminated by the light source.

 A CRI value of 80+ will effectively portray colors and finishes. When the most accurate color rendering is essential, 90+ CRI values are recommended.

3m-double-adhesive-tape

3M Strong Double Adhesive Tape

These LED Strips come equipped with 3M Double Sided adhesive tape. By using 3M tape, we guarantee that the strip will be able to resist and last its entire life cycle without any problems regarding adhesion to the surface where its installed.

30LED-dotless-led-strip-rgb-12V-10mm

RGB Color 150 LED Count

This LED Strip comes equipped with 150 count RGB LED chips throughout the entire roll. This LED Strip is recommended for great Accent Lighting Installations. Suitable for indirect lighting setups.

12v-voltage

Low Voltage 12V DC

Among the many benefits of using low voltage LED we can mention that safety is probably the principal one. Due to the significantly lower voltage running through the light fittings themselves, low voltage lighting is much safer to use.

4"-cutting-cuttable-lenght

4" Cuttable Marks

This LED RGB Strip uses 4″ Cuttable marks. Recommended for Accent Lighting Installations where an exact fit is not critical.

10mm-strip-width

10mm Strip Width

This LED Strip has a width of 10mm which permits it to be installed in most spots and custom made projects.

Additional information
Weight 0.3125 lbs
Dimensions 8.25 × 7.38 × 0.63 in
Color Options

RGB

Power Consumption

36W

PCB Finish

White

Beam Angle

120°

CE Compliance

Yes

Chip Type

SMD5050

Connection

DC Wires/ Soldering Connection

Controllable By

Any 12VDC RGB Controller

CRI

>75

Cuttable Length

4 inches

Dimmable

Yes

Compatible Dimmer Unit(s)

12VDC Power Supply + RGB Controller with Dimming Functions

Driver Type

Need DC12V Power Source

Length

16.4'

Width

0,4"

Height

0,1"

Finish

White PCB

Input Voltage

12VDC

IP Rating

IP20

Life Span

50,000 Hrs

Strip Width

10mm

Mounting Type

3M adhesive Tape

Power Per Foot

2.2W/ft

Rohs Compliance

Yes

Suitable For Damp Location

No

Suitable For Wet Location

No

UL Listed

Yes

LED Per Feet

9 LEDs/ft

Warranty

5 Years

LED Per Meter

60 LED/Meter

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.