Easy to install and to use, this dimming device offers you the intuitive systems to control the light intensity of your low voltage lighting sources. The system fits any US Standard 1-gang box, allow you to maintain a clean look in your wall. It is used to control single color LED strips, and it must be pair with at least one receiver “ECTSU-RC1C8A”.
SUN RF Wall Mount Dimmer for Single Color Strips
$36.50
- Radio Frequency Communication System.
- It needs to be paired with receiver ECTSU-RC1C8A, “SR-1009CS” (sold separately).
- Attenuates any low voltage single color unit.
- Powered by a 3VDC Battery. Replaceable battery. Long life span.
- This device can be paired to unlimited receivers.
- Single push on rotating wheel will turn on/off the lights synced to it.
- Control distance up to 20 meters.
Only 1 left in stock
SKU: ECTSU-WM1CCategories: CONTROLLERS, ENTERTAINMENT, HAND HELD REMOTE CONTROL, LOW VOLTAGE DIMMERS
Specifications
Electrical Information
Dimmable
Dimming capabilities with receiver
Input Voltage
Battery powered
General Characteristics
Length
8"
Width
5"
Height
2"
IP Rating
IP20
Warranty
2 Years
Finish
White
Linear Lighting Characteristics
Strip Compatibility
Single Color Strips
Installation Related Information
Connection
Battery Powered, No needed.
Mounting Type
1-Gang Box, Direct Wall Mount
Control Unit Information
Pairing Method
RF Wireless (Pairing)
Remote Controller
This unit is a remote control unit
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
4-1/2″ LED Flat Round Panel – Multicolor RGBW, 9W
$27.50
- RGBW Drop Ceiling Lamp.
- It requires a 24VDC power supply and RGBW controller which are not included.
- A power supply can feed several RGBW panel units.
100W Waterproof Meanwell Power Supply, 24VDC
$50.99
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 100W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGB Chips, RGB High Output Unit
$29.99
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- LED flexible strip for interior use.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGB controller are not included.
60W Waterproof Meanwell Power Supply, 24VDC
$35.50
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
RGBW DMX Decoder, 5A per Channel, RJ45
$59.25
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 4 Channels (RED, GREEN, BLUE & WHITE)
- Maximum current: 20A (5A per Channel)
- Rated Power: 240W/12V, 480W/24V.
- RJ45.
8-feet Deep Trim-less Aluminum Channel for Drywalls
$69.99
- Interior use.
- For Trim-less mounted applications for a seamless look (Drywall use).
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- 2 LED lines can be installed of 8mm, 10mm, and 12mm strip.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.
200W Waterproof Meanwell Power Supply, 24VDC
$72.25
- It operates on 90-305VAC.
- 24VDC Output Voltage.
- Maximum power rated at 200W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
$39.50
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.