Our state of the art RGB controller posses a clean look with a touch system that differentiate for any traditional low voltage controller. Our device gives the user the control to set those RGB units to the desired color or animation to create the right mood at the given moment. The device fits in any US Standard 1-gang box maintaining a clean look in the walls. The device offer the option to control up to 4 different zones for even better lighting scenarios. It must be pair with at least one receiver “ECTSU-RC4C5A”.
SUN RF Wall Mount Controller for RGB Strips, Touch Panel
$45.50
- Radio Frequency Communication System.
- It needs to be paired with receiver ECTSU-RC4C5A, “SR-1009FA” (sold separately).
- Allow user to control low voltage RGB strips, or any low voltage unit.
- Input Voltage: 120VAC.
- This device can be synced to unlimited receiving devices.
- Allows user to control up to 4 different zones.
- Control distance up to 20 meters.
Only 1 left in stock
SKU: ECTSU-WM3C2Categories: CONTROLLERS, ENTERTAINMENT, HAND HELD REMOTE CONTROL, MULTICOLOR
Specifications
Electrical Information
Dimmable
Dimming capabilities with receiver
Input Voltage
120VAC
General Characteristics
Length
8"
Width
5"
Height
2"
IP Rating
IP20
Warranty
2 Years
Finish
White
Linear Lighting Characteristics
Strip Compatibility
RGB Strips
Installation Related Information
Connection
Hardwired Connection, Screw Terminal Block
Mounting Type
1-Gang Box, Direct Wall Mount
Control Unit Information
Pairing Method
RF Wireless (Pairing)
Remote Controller
This unit is a remote control unit
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
200W Enclosed Power Supply, 24VDC
$55.99
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 24VDC Output Voltage.
- Maximum power rated at 200W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
60W Waterproof Meanwell Power Supply, 24VDC
$35.50
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
RGBW DMX Decoder, 5A per Channel, RJ45
$59.25
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 4 Channels (RED, GREEN, BLUE & WHITE)
- Maximum current: 20A (5A per Channel)
- Rated Power: 240W/12V, 480W/24V.
- RJ45.
RGB DMX Decoder, 6A per Channel, Block Terminal
$49.50
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 3 Channels (RED, GREEN & BLUE)
- Maximum current: 18A (6A per Channel)
- Rated Power: 216W/12V, 432W/24V.
- Block Terminal Connection.
UL SMD5050 LED Strips 150 RGB Chips, Wet Rated
$25.99
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGB controller are not included.
8-feet Deep Aluminum Channel
$37.99
- Interior use.
- For Surface mounted applications.
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- Easy installation.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- Minimum Order Quantity: 4 units.
300W Waterproof Meanwell Power Supply, 12/24VDC
$128.25
- It operates on 90-305VAC.
- Voltage Changeable. 24VDC or 12VDC Output Voltage.
- Maximum power rated at 300W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
8-feet Deep Trim-less Aluminum Channel for Drywalls
$69.99
- Interior use.
- For Trim-less mounted applications for a seamless look (Drywall use).
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- 2 LED lines can be installed of 8mm, 10mm, and 12mm strip.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.