Modernize any project or add illumination to a desired space, no matter the size, via these revolutionary connectors for LED strips. Our innovative connectors allow you to use LED strips that has been cut to a specific length, in order to fit the strips in any possible location. Always check the kind of LED strip you’re using for the compatible connector.
Strips to Power Connector for 8mm SMD Single Color LED Strips
$3.25
- Connector for 8mm single color strip.
- Easy snap-in installation system.
- 8mm 2-pin Connector.
In stock
Specifications
General Characteristics
Length
4"
Width
4"
Height
0,5"
Finish
White Terminal, Color Cables
Warranty
1 Year
IP Rating
IP20
Linear Lighting Characteristics
Strip Compatibility
Single Color Strips
Strip Width
8mm
Installation Related Information
Connection
Snap-in
Related products
UL SMD5050 LED Strips 600 RGB Chips, RGB Super Bright Output Unit
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 600 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 24VDC power units.
- LED flexible strip for interior use.
- Cut at every 6th LED / 2" on the cuttable mark.
- Power supply and RGB controller are not included.
Strips to Power Connector for 10mm 2216 and COB Single Color LED Strips
- Small Connector to connect a 10mm single color strip to input cable.
- Easy snap-in installation system.
- Compatible with SMD2016 and COB Strips
- It fits inside most aluminum profiles.
3.3-feet 2-pin Female to Male Connector, IP65, White
- Plug and Play Connectors.
- IP65 rated.
- For Single Color.
RGB Strip to Power Connector for 10mm SMD RGB LED Strips
- Connector for 10mm RGB Strips.
- Easy snap-in installation system.
- Compatible with SMD5050 RGB color strips.
- 10mm 4-pin Connector.
Two Ends Connector for 12mm RGBW Strips
- Connector to Join 2 Strips together.
- Easy snap-in installation system.
- Compatible with SMD5050 RGBW color strips.
- 12mm 5-pin Connector.
UL SMD2835 LED Strip 300 Side Bendable Single Color Chips, Bright Output
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- For interior use only.
- Works with 12VDC power units.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply is not included.
Strip to Wire Connector for 8mm COB Single Color LED Strips
- Small Connector to join a 8mm single color strip to a 2-lead wire.
- Easy snap-in installation system.
- Compatible with 8mm COB Strips
- It fits inside most aluminum profiles.
Two Ends “L” Connector for 12mm RGBW Strips
- Connector to Join Strips together.
- Easy snap-in installation system.
- Compatible with SMD5050 RGBW strips.
- 12mm 5-pin Connector.
