LED Down lights are ideal for installation of ceiling lights where the space between the ceiling and the drop ceiling is limited. In general, housings (cans) are used for the majority of ceiling lights, but this can only be accomplished where sufficient height is specified for placement. However, when faced with circumstances of not having the space greater than 4-5 inches to fit standard housings, either due to new construction or remodeling, this product is the ideal solution. As with all of our products, style and energy efficiency is essential and is offered in this product as well. Note that each LED Down light comes with an external individual driver. Do not use a different external driver to feed this product.
4″ Interchangeable Trim Down Light – Silver Frame, 8W
$25.67
- Drop ceiling light.
- Color Selectable 3000K, 4000K, 5000K.
- 3″ or 4″ Trim.
- External driver is included.
- Dimmable.
- Easy installation. Product comes with 2 spring arms.
- Directional light.
1 × 4" Interchangeable Trim Down Light - Silver Frame
In stock
$2.49
1 × Interchangeable Trim Down Light Engine - Silver Frame, 8W
In stock
$21.50
In stock
Specifications
Electrical Information
Power Consumption
9W
Dimmable
Yes
Driver Type
External Constant Current
Input Voltage
120VAC
Lighting Characteristics
Color Options
3000K, 4000K, 5000K
Luminous Flux
750Lm
Beam Angle
40°
Chip Type
COB
Lighting Cover
Clear
CRI
>80
Life Span
50,000 Hrs
General Characteristics
Hole Size
3", 4"
Length
2,5
Width
2,5"
Height
3"
Finish
Silver
IC Rated
No
IP Rating
IP54
Shape
Round
Suitable For Damp Location
Yes
Suitable For Wet Location
No
Warranty
3 Years
Size Reference
3", 4"
Installation Related Information
Connection
Hardwired Connection
Mounting Type
Snap-In Clicks
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
100W Waterproof Meanwell Power Supply, 12VDC
- It operates on 90-264VAC.
- 12VDC Output Voltage.
- Maximum power rated at 100W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.
60W Waterproof Meanwell Power Supply, 12VDC
- It operates on 90-264VAC.
- 12VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
320W Waterproof Meanwell Power Supply, 24VDC A
- It operates on 90-305VAC.
- 24VDC Output Voltage.
- Maximum power rated at 320W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
60W Waterproof Meanwell Power Supply, 24VDC
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
150W Enclosed Power Supply, 12VDC
- It operates on 115VAC or 230VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
40W Dimmable Power Supply for 12VDC LED Units, Thin Design
- It operates on 120VAC.
- Dimmable Unit. 12VDC Output Voltage.
- UL Recognized, Class 2.
- Maximum power rated at 40W.
- Suitable for Damp and Wet locations.
- Compatible with most known brand including Lutron, Leviton and Legrand.
- Pair it with Magnetic Low Voltage (MLV) dimmers.
- Manufactured by Magnitude Lighting.
UL SMD5050 LED Strips 300 RGB Chips, Wet Rated
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGB controller are not included.